HITBOT ELECTRIC GRIPPER SERIES – Z-ECG-10 E toru nga maihao Hiko Hoko
Kāwai Matua
Te ringa karetao ahumahi /Te ringa karetao mahi tahi / Te kaikawe hihiko/Kaiwhakahaere mohio/Nga otinga Aunoa
Taupānga
Āhuahira
·Rawhi takahanga rapunga, mahi putanga rohe
·Te kaha, te tuunga, te tere tere, te whakahaere tika ma te Modbus
·E toru nga maihao i waenganui i nga ringaringa
·Kaiwhakahaere-i roto: iti tapuwae, ngawari te whakauru
·Aratau mana: 485 (Modbus RTU), I/O
Te Maama Hiko E Toru Maihao He ngawari ki te Rawhi i nga Mea Porotakaro
Mahinga Nui
Te Kaha Rawhi: 3-10N,
Te Kaha Rawa Nui
Tika ki te Whakahaere
Ka taea te whakahaere e Modbus
Maamaa ki te Urupare
Kei a ia te mahi pf clamping drop detection putanga rohe.
Kaiwhakahaere Hanga-i roto
He iti te uhi mokowhiti, he ngawari ki te whakauru.
Aratau Mana-maha
Tautoko 485 (Modbus) I/O
Toru-Mamati Gripper
E toru nga maihao ki te awhi, e tika ana mo nga momo waa
Tawhā Whakatakotoranga
| Tauira Nama Z-ECG-10 | Tawhā |
| Tapeke whiu | 10mm |
| Te kaha hopu | 3-10N |
| Te tukurua | ±0.03mm |
| E taunaki ana kia mau te taumaha | Max. 0.2kg |
| Tukunga aratau | Rack and Pinion + Ball Guide Rail |
| Te whakakii hinu o nga waahanga neke | Ia ono marama ranei 1 miriona nekehanga / wa |
| Te wa motini whiu kotahi | 0.3s |
| Te awhe pāmahana whakahaere | 5-55 ℃ |
| Te awhe haumākū whakahaere | RH35-80（Karekau he hukapapa） |
| Pangopango | taha kotahi: 0.2mm |
| Te whakahaere whiu | Ka taea te whakarite |
| Te whakatikatika kaha awhi | Ka taea te whakarite |
| Taumaha | 0.5kg |
| Ahu（L*W*H） | 73*73*95.5mm |
| Koeke Tiaki | IP20 |
| Momo motuka | Motor Hiko Servo |
| Pūkenga o nāianei | 0.6A |
| Ngaohiko whakatau | 24V ±10% |
| Tūtatari nāianei | 0.3A |
| Whakaaetia te uta pateko i te ahunga poutū | |
| Fz: | 70N |
| Te taipana whakaaetia | |
| Mx: | 0.64 Nm |
| Taku: | 0.4 Nm |
| Mz: | 0.48 Nm |
Tika ki te Turanga, Toru-Mahao Maamaa
Z-ECG-10 toru maihao hiko gripper, tona tukuruatanga ko ± 0.03mm, e toru-maihao ki te rawhi, a he te mahi o te awhi takahanga rapunga, putanga rohe, e taea te pai ake ki te rawhi taonga rango.
Kaiwhakahaere Hanga-i roto, Whakakotahitanga Teitei
He whakamarumaru nui mo te utaina tere, kia kore ai te kaikawe hiko e aukati i te punaha me etahi atu ahuatanga rerekee. he kaiwhakahaere i hangaia, ka taea te whakahaere i te kaha, te bit me te tere, ka hipokina te waahi mahi iti, ngawari ki te whakauru.
He ahua iti, he ngawari ki te whakauru
Ko te Z-ECG-10 ko te tango i te momo tuku o te whatanga me te pinion + arataki raina, ko tona rahi ko L73 * W73 * H109, he 0.65kg noa te taumaha, he maamaa tona hanganga, he tautoko i nga momo whakaurunga maha, he ngawari ki te whakaoti i nga mahi awhi maha. .
Tere ki te Tauhohenga, Tika Mana Whakahaere
Ko te whiu poto rawa atu ko te 0.3s, ko te 3-10N te kaha awhi, ko te whiu ko te 10mm, ko te taumaha he tata ki te 0.2kg, ka taea te mohio ki te tino tika ki te awhi.
Whakarehia nga Aratau Mana, He ngawari ki te whakahaere
Ka taea e Z-ECG-10 te whakahaere tika e Modbus, he ngawari ki te tohatoha, ki te whakamahi i te whakawhitiwhiti korero a Digital I / O, me kotahi noa te taura hei hono i te ON / OFF, he pai hoki ki te punaha whakahaere matua PLC.
Uta Pokapū o Gravity Offset
To Tatou Pakihi
